Multi axis system: modular linear axis system for automation

A wide range of freely combinable parameters

Thanks to the wide variety of parameters available, it is possible to find a SYZAX model for a very large range of needs and applications.

Type	Carrier type
C	C : Compact
H	H : Heavy

Carriage type	Length
C1	230
C2	230
C3	280
C4	326
C5	372
C6	504
H1	300
H2	300
H3	300
H4	330
H5	376
H6	508

Encoder	Name
10	Standard 1μm BiSS-C
11	Standard 1μm SSI
20	High performance 0.25μm EnDat 2.2
21	High performance 0.25μm BiSS-C
23	Ultra-high performance 0.25μm EnDat 2.2
23	Ultra-high performance 0.25μm BiSS-C

End stop	Name
B	With protective bellow
C	With pneumatic compensation
S	Standard
W	With bellow and compensation

Motor	Name
1	400 N peak 200 N continuous
2	600 N peak 300 N continuous
3	800 N peak 400 N continuous
4	1 000 N peak 500 N continuous
5	1 200 N peak 600 N continuous
6	1 600 N peak 800 N continuous

Bearings protect	Name
D	Double end seals (heavy only)
K	Double end seals + scrapers (heavy only)
S	End seals
Z	End seals + scrapers (heavy only)

SYZAX module strokes are selectable mm per mm – track length up to 3 meters.

Performance optimization through combination of carriers

On multiple axis configuration, the different carriage types allow to keep the dynamic characteristics between the different axes as close as possible, in relation to the mass carried by each axis (e.g. in cantilever carriage type C3 on X, C2 on Y and C1 on Z).

Compact axes can be mounted on heavy axes using an adaptation plate, provided by us. For example, it can be sometimes useful for the X and Y to be heavy axes in cantilever configuration to enhance rigidity and lifetime.